Patch

Peach
Fire Department

Training Report
Fire Officer I · 9.6.1 · Describe the inspection procedure
Hours
2
ISO Category
Officer
Equipment
The forms, policies, and records this task uses. A crew or a paper scenario is enough when the task is a drill and not a real incident.

Explain how this department does a fire inspection, including how a hazard gets marked and how a hazardous-materials identification system is read. Fire Officer I — NFPA 1020 Chapter 9. Task 9.6.1. Training objective. Assign it and watch it get done. Signing this sheet records the training.

  1. Know — The inspection procedure.
  2. Know — Detection, alarm, and protection systems at the level a company officer has to recognize.
  3. Know — Common fire and life-safety hazards.
  4. Do — Say which code element applies and what the approved correction is. You are describing the procedure, not sitting for inspector.
NameRankGFSTC #Signature
NameRankGFSTC #Signature

Firefighters from other departments. Add each person by hand, then tap to sign.

NameDepartmentRankGFSTC #Signature
EquipmentDamagedComments
Punctual · Valuable · Selfless

Submitted

Stop — Check Your Work

Tick every box to confirm. PDF will not download until all 7 are checked.
Please check after yourself before downloading. If anything below is not done, go back and fix it before you submit.
  • Time is entered correctly in 24-hour format (e.g. 0800, 1330).
  • Hours are whole numbers only — NO .5. Use 3, 4, 8 — not 3.5.
  • Description and objectives are filled out correctly.
  • All personnel participating have signed.
  • Driver Training: If personnel did NOT drive, they do NOT sign — they need an Area Familiarization sign-in instead.
  • Facility training is at least 3 hours, in gear, at the training facility or an approved training facility. Structural, vehicle, or wildland.
  • Reviewed everything above. Questions? Call Dorman BEFORE submitting.
0 of 7 confirmed

Sign Here