Patch

Peach
Fire Department

Training Report
Fire Inspector · 7.4.1 · Compute the occupant load
Hours
2
ISO Category
Other
Equipment
The code set, forms, and scene or classroom props this task names. Department policy if it is tighter than these objectives.

Calculate the maximum allowable occupant load for the building and the use. Fire Inspector — NFPA 1030 Chapter 7. Task 7.4.1. Training objective. Assign it and watch it get done. Signing this sheet records the training.

  1. Know — How the code counts people for an occupancy and a use.
  2. Know — Operational features that change the number.
  3. Do — Measure.
  4. Do — Apply the factor.
  5. Do — Read the plans.
  6. Do — Use the calculator and show the math.
NameRankGFSTC #Signature
NameRankGFSTC #Signature

Firefighters from other departments. Add each person by hand, then tap to sign.

NameDepartmentRankGFSTC #Signature
EquipmentDamagedComments
Punctual · Valuable · Selfless

Submitted

Stop — Check Your Work

Tick every box to confirm. PDF will not download until all 7 are checked.
Please check after yourself before downloading. If anything below is not done, go back and fix it before you submit.
  • Time is entered correctly in 24-hour format (e.g. 0800, 1330).
  • Hours are whole numbers only — NO .5. Use 3, 4, 8 — not 3.5.
  • Description and objectives are filled out correctly.
  • All personnel participating have signed.
  • Driver Training: If personnel did NOT drive, they do NOT sign — they need an Area Familiarization sign-in instead.
  • Facility training is at least 3 hours, in gear, at the training facility or an approved training facility. Structural, vehicle, or wildland.
  • Reviewed everything above. Questions? Call Dorman BEFORE submitting.
0 of 7 confirmed

Sign Here