Patch

Peach
Fire Department

Training Report
Fire Inspector · 7.4.13 · Match the building to the construction documents
Hours
2
ISO Category
Other
Equipment
The code set, forms, and scene or classroom props this task names. Department policy if it is tighter than these objectives.

Verify that what was built matches the approved construction documents for fire protection, egress, and building service equipment. Fire Inspector — NFPA 1030 Chapter 7. Task 7.4.13. Training objective. Assign it and watch it get done. Signing this sheet records the training.

  1. Know — The codes for installation and testing of those systems.
  2. Do — Witness and validate the tests. The drawings are the baseline, not a suggestion.
NameRankGFSTC #Signature
NameRankGFSTC #Signature

Firefighters from other departments. Add each person by hand, then tap to sign.

NameDepartmentRankGFSTC #Signature
EquipmentDamagedComments
Punctual · Valuable · Selfless

Submitted

Stop — Check Your Work

Tick every box to confirm. PDF will not download until all 7 are checked.
Please check after yourself before downloading. If anything below is not done, go back and fix it before you submit.
  • Time is entered correctly in 24-hour format (e.g. 0800, 1330).
  • Hours are whole numbers only — NO .5. Use 3, 4, 8 — not 3.5.
  • Description and objectives are filled out correctly.
  • All personnel participating have signed.
  • Driver Training: If personnel did NOT drive, they do NOT sign — they need an Area Familiarization sign-in instead.
  • Facility training is at least 3 hours, in gear, at the training facility or an approved training facility. Structural, vehicle, or wildland.
  • Reviewed everything above. Questions? Call Dorman BEFORE submitting.
0 of 7 confirmed

Sign Here